Monday, 21 November 2016

Refractive index (Absolute speed or effective speed?)



Question: What is the refractive index of a medium?



A student in Singapore complained the following examination question: 

What is the refractive index of a medium? 
A. the ratio of the speed of light in air to the speed of light in the medium. 
B. the ratio of the speed of light in the medium to the speed of light in air. 
C. the ratio of the speed of light in the medium to the speed of light in vacuum. 
D. the ratio of the speed of light in vacuum to the speed of light in the medium. 

The student chose the answer “A,” but his physics teacher told him that the answer should be “D.” However, this does not seem reasonable to him because the recommended textbook states that “the refractive index is a ratio between the speed of light in air or vacuum and the speed of light in a medium (Chew & Chow, 2007, p. 231).” Subsequently, this led to complaints that the textbook has errors and the ministry of education has recommended the wrong physics textbook. Alternatively, we can define absolute index of refraction as a ratio of the speed of light in a vacuum to the speed of light in a medium. Thus, this is also a problem of terminology and thus, the examination question should be phrased more carefully.

How would Feynman answer?

An ability to state the refractive index as a ratio of the speed of light in vacuum and the speed of light in a medium does not imply a genuine understanding of the concept. In short, Feynman would explain that the speed of light waves in a medium remains constant, but it is the effective speed of the light waves that is decreased. We should have some knowledge of Feynman’s answer from the perspective of wave mechanics, electromagnetism, quantum mechanics, and problems of defining index of refraction as shown below.

1. Effective speed of light waves: Strictly speaking, it is imprecise and incomplete to state that the speed of light is reduced in a transparent material or medium. In general, there are different kinds of speed (or velocity) of light waves such as phase velocity, group velocity, and effective speed. In Feynman’s words, “[i]t is approximately true that light or any electrical wave does appear to travel at the speed c/n through a material whose index of refraction is n, but the fields are still produced by the motions of all the charges — including the charges moving in the material — and with these basic contributions of the field travelling at the ultimate velocity c. Our problem is to understand how the apparently slower velocity comes about (Feynman et al., 1963, section 31–1 The index of refraction).” Simply phrased, light or light waves still travel at the same ultimate speed of light, c, instead of c/n. However, the constant speed of light waves appears to slow down as a result of moving charges in the material. 

Importantly, there should be a deeper understanding of the meaning of effective speed (or apparent speed) of light. We should distinguish the term absolute speed and effective speed for the speed of light in the material. Feynman explains that “[b]efore we proceed with our study of how the index of refraction comes about, we should understand that all that is required to understand refraction is to understand why the apparent wave velocity is different in different materials. The bending of light rays comes about just because the effective speed of the waves is different in the materials (Feynman et al., 1963, section 31–1 The index of refraction).” Although the bending of light is sometimes explained by the principle of least time, it is also important to understand the concept of absolute speed of light in different materials. Better still, we should emphasize that the refractive index is related to the effective speed of light in the material or medium.

Furthermore, the effective or apparent speed of light can be explained by the phase shift of light waves. Feynman elaborates that “[i]n spite of the fact that it is said that you cannot send signals any faster than the speed of light, it is nevertheless true that the index of refraction of materials at a particular frequency can be either greater or less than 1. This just means that the phase shift which is produced by the scattered light can be either positive or negative (Feynman et al., 1963, section 31–3 Dispersion).” Note that the refractive index of a material is related to the phase velocity or speed of nodes of the waves. Moreover, there is a phase difference between an incident light wave and the emitted light wave generated by an atom. If the phase of the emitted light wave is delayed, the effective speed of light is slowed down.

2. Theories of refractive index:
The concept of refractive index can be explained by wave mechanics, electromagnetism, and quantum mechanics. Generally speaking, the oscillation of atoms in a medium can be modeled by using wave mechanics. Feynman mentions that “[y]ou may think that this is a funny model of an atom if you have heard about electrons whirling around in orbits. But that is just an oversimplified picture. The correct picture of an atom, which is given by the theory of wave mechanics, says that, so far as problems involving light are concerned, the electrons behave as though they were held by springs (Feynman et al., 1963, section 31–2 The field due to the material).” In a sense, we can idealize the electrons as tiny oscillators with a resonant frequency and having a linear restoring force. Therefore, the driven motion of the electrons can re-emit light waves through the material.

In addition, the physical principles behind the oscillation of molecules are based on electromagnetism. Feynman clarifies that “[t]he electric field of the light wave polarizes the molecules of the gas, producing oscillating dipole moments. The acceleration of the oscillating charges radiates new waves of the field. This new field, interfering with the old field, produces a changed field which is equivalent to a phase shift of the original wave. Because this phase shift is proportional to the thickness of the material, the effect is equivalent to having a different phase velocity in the material (Feynman et al., 1964, section 32–1 Polarization of matter).” Essentially, Feynman has simplified the discussion by excluding complications that arise from the effects of light waves changing the electric fields at the oscillating charges. He has assumed the forces on the charges in the atoms came only from the incoming wave, and did not delve deeper in the re-emitted waves from all other atoms.

Fundamentally speaking, we can have a quantum interpretation of the equation derived by wave mechanics on the refractive index. In a footnote of his lecture, Feynman states that “[i]n quantum mechanics even an atom with one electron, like hydrogen, has several resonant frequencies. Therefore Nk is not really the number of electrons having the frequency ωk, but is replaced instead by Nfk, where N is the number of atoms per unit volume and fk (called the oscillator strength) is a factor that tells how strongly the atom exhibits each of its resonant frequencies ωk (Feynman et al., 1963, p. 31-8).” In short, the interactions of light with a material can be visualized as the absorptions and re-emissions of photons. As a result, the absorptions and emissions of light waves in the material cause the phase shift and the reduction of (effective) speed of light.

3. Problems of defining refractive index:
The refractive index is not a simply a constant and it is dependent on the frequency (or wavelength) of light waves. According to Feynman, “we have also learned how the index of refraction should vary with the frequency ω of the light. This is something we would never understand from the simple statement that ‘light travels slower in a transparent material’ (Feynman et al., 1963, section 31–3 Dispersion).” In essence, the speed of light is dependent on the color and the refractive index is not exactly defined by the ratio of the speed of light in vacuum to the speed of light in the medium. Mathematically, the index of refraction can be modeled by the equation n = 1 + Nqe2/2ϵ0m02 − ω2) in which N is the number of atoms per unit volume in a plate. We can use this equation to explain the phenomenon of dispersion.

Interestingly, the refractive index can be represented by a complex number. Feynman explains that “the index of refraction is now a complex number! What does that mean? By working out what the real and imaginary parts of n are we could write n = n′ − in′′, where n′ and n″ are real numbers (Feynman et al., 1963, section 31–4 Absorption).” The imaginary part of refractive index means that some energy of light waves can be absorbed by the material or medium. This implies a decrease in the amplitude of the light waves that is proportional to the thickness of the medium such as a piece of glass plate. In other words, the light waves that come out from the other side of the glass plate have lesser energy. Therefore, n″ is sometimes known as the “absorption index.”

On the other hand, there is still a problem of incomplete knowledge in the refractive index. In Feynman’s words, “We still have the problem, of course, of knowing how many atoms per unit volume there are, and what is their natural frequency ω0. We do not know this just yet, because it is different for every different material, and we cannot get a general theory of that now. Formulation of a general theory of the properties of different substances — their natural frequencies, and so on — is possible only with quantum atomic mechanics (Feynman et al., 1963, section 31–3 Dispersion).” Therefore, it is challenging to have a general mathematical equation for all refractive indices that is applicable to all materials. Currently, there are meta-materials in which the refractive index can even be negative.

       To conclude, the knowledge of speed of light is reduced in a transparent material does not mean a good understanding of the concept of refractive index. Nevertheless, Feynman would explain that it is the effective speed of light that is reduced and this is related to the phase shift of light waves in the material. Importantly, the concept of refractive index can be modeled by using wave mechanics, electromagnetism, and quantum mechanics. Furthermore, we should be cognizant of problems of defining refractive index such as it is depending on the wavelengths of light and it is possible to have an imaginary part in the refractive index.

Note: Feynman has a short and interesting explanation on the bending of light in a medium, “[f]inding the path of least time for light is like finding the path of least time for a lifeguard running and then swimming to rescue a drowning victim: the path of least distance has too much water in it; the path of least water has too much land in it; the path of least time is a compromise between the two (Feynman, 1985, p. 51).

References
1. Chew, C. & Chow, S. F. (2007). GCE ‘O’ Level Physics Matters. Singapore: Marshall Cavendish. 
2. Feynman, R. P. (1985). QED: The strange theory of light and matter. Princeton: Princeton University Press. 
3. Feynman, R. P., Leighton, R. B., & Sands, M. (1963). The Feynman Lectures on Physics, Vol I: Mainly mechanics, radiation, and heat. Reading, MA: Addison-Wesley. 
4. Feynman, R. P., Leighton, R. B., & Sands, M. (1964). The Feynman Lectures on Physics, Vol II: Mainly electromagnetism and matter. Reading, MA: Addison-Wesley.

No comments:

Post a Comment